Right-click on your WiFi adapter and select Disable device on the resulting dropdown menu. Wait for some time and right-click the WiFi adapter. On the resulting drop-down, click on Enable device 2) Go to Device manager then uninstall the wireless drivers from Network Adapter and restart the unit and check if the light turns on. 3) Try doing a system restore to the date where unit was working fine. 4) Please update the Bios & Wireless driver from HP website. I mean, wlan is not just sof or hard blocked, it does not even exist there! In the bios built-in options, wireless is enabled (double-checked). Internet connection via usb-connected smartphone which gets the wifi signal works fine. The small LED on the F11 key with a wifi-like icon is orange/yellow, and pressing that button, either with Fn or Here are some useful steps that may restore the Windows 10 control panel features to work properly and restore connectivity. Recommend you do a right-click on the network icon and select network troubleshooter and follow the on-screen instructions. If the issue persists, install the wireless driver from this link. link. δΈ­ζ–‡ (繁體) ζ—₯本θͺž. Hello!!! I have a Dell 15 3567 Laptop With 7200U and Qualcomm QCA9565 802.11b/g/n wireless adapter and I seem to be having lots of problems with the wifi. My wifi keeps randomly disconnecting itself. Hold the power button for at least five seconds to turn off the computer. Turn on the computer and immediately press the F2 key repeatedly, about once every second. The HP PC Hardware Diagnostics (UEFI) main menu is displayed. Select the "Component test" and then select "wireless module" from the list. Move your computer so you can do that and then run WU. If your wireless connection still does not work you will need to buy a wireless adaptor that does work with Windows 7 and add it to your computer. But what else is not working? At this point you are dependent on whatever device drivers are on the Windows 7 dvd and some things were not. I The laptop works on Windows 7, but it seems that due to the different radio management api on Windows 10, the Wifi radio is always "Hardware off" and the HP wireless button will not turn it on. It would seem to be a driver issue to me as when I hit the wireless button, it toggles bluetooth and airplane mode, but does nothing for the wifi. Add a new Wi-Fi network, select your home Wi-Fi, and type the correct password to connect. Reboot your Windows laptop or reboot your Mac. You can reboot a Linux laptop from the command line. Change your laptop's Wi-Fi channel. Most users keep their Wi-Fi adapter working on the 2.4 GHz band, but the 5 GHz band may be required to connect to your Open Terminal again and enter the following command: sudo apt-get install bcmwl-kernel-source broadcom-sta-common broadcom-sta-source firmware-b43-installer. After the package installation is complete, reboot. Open Additional Drivers. Enable the Broadcom STA driver. Your Wifi should now be active and functional. hia3gRx.